System Security - Compaq External RAID Controller & Subsystem Infortrend Operation Manual

Verification on LD
initialization writes
Drive S.M.A.R.T.
support
Clone Failing Drive
Automatic Shutdown on
over-temperature
condition

System Security:

Password protection
User-configurable
Password validation
timeout
SSL-enabled
RAIDWatch Agents
B-8
Supported. Performs read-after-write during logical drive
initialization to ensure data is properly written to drives.
Supported. Drive failure is predictable with reference to
the variables detected. Reaction schemes are selectable
from Detect only, Perpetual Clone and Copy + Replace.
These options help to improve MTBF.
Users may choose to clone data from a failing drive to a
backup drive manually
Controller automatically starts a shutdown sequence upon
the detection of high-ambient temperature for an extended
period of time.
Supported. All settings requires the correct password (if
set) to ensure system security.
Supported. After certain time in absence of user
interaction, the password will be requested again. This
helps to avoid unauthorized operation when user is away.
Agents communicate to the controller through limited set
of authorization options.
Infortrend