Scsi Drive Read/Write Test - Compaq External RAID Controller & Subsystem Infortrend Operation Manual

SCSI Drive Read/Write Test

From the "View and Edit SCSI Drives"
menu, select a new or used drive that
the utility is to be performed on; then
press
Utilities;" then press ENT.
"Read/Write Test" and press ENT.
Press
enable/disable the following options:
1.
2.
3.
When
select "Execute Drive Testing" and
press ENT to proceed.
The Read/Write test progress will be
indicated as a percentage.
You
"Read/Write Test" later and press
Testing Progress" or to "List Current
Bad Block Table." If you want to stop
testing the drive, select "Abort Drive
Testing" and press ENT to proceed.
5-41
ENT. Select
or to select and choose to
"Auto Reassign Bad Block;
Abort When Error Occurs;
Drive Test for - Read Only/Read
and Write.
finished with
may press ESC
to select to "View Read/Write
Drive Read/Write
Auto Reassign
"SCSI Drive
Disabled
Choose
Abort When Error
Occur-Enabled
Drive Test for
Read and Write..
Execute Drive
configuration,
and select
View Read/Write
or
Test Progress ..
List Current
Bad Block Table.
Abort Read/Write
Test ..
..
Testing ..
Drv Testing 23%
Please Wait !
Testing ..
Infortrend