Compaq External RAID Controller & Subsystem Infortrend Operation Manual page 131

Choose the logical volume you wish to partition, then press
[ENTER]. Choose "Partition logical volume", then press [ENTER].
Select from the list of undefined partitions and Press [ENTER].
A list of partitions displays. If the logical volume has not yet been
partitioned, all volume capacity will list as "partition 0."
Press [ENTER] and type the desired size for the selected partition,
and then press [ENTER] to proceed. The remaining size will be
automatically allotted to the next partition.
Choose Yes to confirm when prompted to the "Partition Logical
Volume?" message. Press [ENTER] to confirm. Follow the same
procedure to partition the remaining capacity of your logical
volume.
When a partition of a logical drive/logical volume is deleted, the
capacity of the deleted partition will be added to the last partition.
As long as a partition has been changed, it is necessary to re-configure all
host LUN mappings. All data in it will be lost and all the host LUN
mappings will be removed with any change to partition capacity.
7-12
WARNING!
Infortrend