10.3.2 Via Terminal Emulation; Redundant Configuration Using Automatic Setting - Compaq External RAID Controller & Subsystem Infortrend Operation Manual

Choose "Set Peripheral Device Entry..," then press
[ENT].
Choose "Redundant Ctlr Function__," then press
[ENT].
The message "Redundant Ctlr Autocfg Degraded"
will appear on the LCD.
Press [ENT] and the message "Deassert Reset on
Failed Ctlr?" will appear.
Press [ENT] for two seconds and the controller
will start to scan for the new controller and bring
it online.
The new controller will then start to initialize.
Once initialized, it will assume the role of the
Secondary controller.

10.3.2 Via Terminal Emulation

Redundant Configuration Using Automatic Setting

Power on Controller 1. Make sure Controller 2 is powered-off.
Enter the Main Menu.
Use the arrow keys to navigate through the menus. Choose "View and Edit
Peripheral Devices," then press [ENTER].
Choose "Set Peripheral Devices Entry," then press [ENTER].
"Redundant Controller [Function]," and then press [ENTER]. (Note: The
10-26
Set Peripheral
Devices Entry ..
Redundant Ctlr
Function__
Redundant Ctlr
Autocfg Degraded
Deassert Reset
on Failed Ctlr?
Redundant Ctlr
Scanning
Initializing...
Please Wait...
SR2000 v3.**
gggggg
Choose
Infortrend