View Drive Information; View And Edit Host-Side Parameters - Compaq External RAID Controller & Subsystem Infortrend Operation Manual

A drive enclosure usually has drive slots pre-assigned with specific
IDs. There are occasions when an ID needs to be assigned manually
to a device other than an ID provided otherwise. The "set slot
number" and the "add drive entry" functions are reserved for
Infortrend's Fault-bus operation.

View Drive Information

If the selected drive belongs to a drive group that is configured in a
dual-loop, the "Redundant Loop ID" will be displayed here.

View and Edit Host-Side Parameters

Fibre Operation
8-9