Table of Contents
Advertisement
current clock setting will be displayed
on the LCD.
Press ENT for two seconds to change
the setting.
Parity Check
Press
then press ENT.
Choose "Parity Check," then press
ENT. The current clock setting will be
displayed on the LCD.
Press ENT for two seconds to change
the setting.
Disconnecting Support
Press
then press ENT.
Choose "Disconnect Support," then
press ENT. The current clock setting
will be displayed on the LCD.
Press ENT for two seconds to change
the setting.
Maximum Tag Count
Press
then press ENT.
Choose "Max Tag Count," then press
ENT. The current clock setting will be
displayed on the LCD.
Press
then press ENT for two seconds to
change the setting.
Front Panel Operation
or
to select a SCSI target,
or
to select a SCSI target,
or
to select a SCSI target,
or
to change the setting,
Max Xfer Narrow
Only
SCSI Target
CHL=1 ID=0
..
Parity Check
Enabled
..
Disable
Parity Checking?
SCSI Target
CHL=1 ID=0
..
Disconnect
Support Enabled
Disable Support
Disconnect
SCSI Target
CHL=1 ID=0
..
Max Tag Count:
Default( 32)
..
Tag Cur=32
Set to:Default ?
5-32
?
?
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the External RAID Controller & Subsystem Infortrend and is the answer not in the manual?