Table of Contents
Advertisement
An empty drive entry is added for this
channel/SCSI
management. The drive status is
"ABSENT."
To clear the empty drive entry, press
ENT and use arrow keys to select
"Clear Drive Status," then press ENT
to proceed.
Press ENT for two seconds to confirm
the drive entry's deletion. Information
of other drives will be displayed
instead.
Identifying a Drive
Press ENT for two seconds to enter the
Main Menu. Press
"View and Edit SCSI Drives," then
press ENT.
SCSI
displayed. Press
SCSI drive, then press ENT.
Press
then press ENT to continue.
Press
Drives", "Flash Selected Drive", or
"Flash All But Selected Drive". Press
ENT for two seconds to flash the
read/write LEDs of all the connected
drives.
Or, press
Selected SCSI Drives," then press ENT
for two seconds to flash the read/write
LED
read/write LED will light for a
configurable time period from 1 to 999
seconds.
Front Panel Operation
ID
for
or
drive
information
or
or
to select "Identify Drive,"
or
to select "Flash All
or
to select "Flash
of
the
selected
C=1 I=1 ABSENT
enclosure
Clear Drive
Status
Clear Drive
Status
View and Edit
to select
SCSI Drives
will
be
C=1 I=0
to select a
GlobalSB SEAGATE
Identify Drive
Flash All
Drives
Flash Selected
SCSI Drives
drive.
The
Flash all But
Selected Drives?
..
?
1010MB
..
?
?
5-24
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the External RAID Controller & Subsystem Infortrend and is the answer not in the manual?