Assigning A Name To A Logical Drive; Rebuilding A Logical Drive - Compaq External RAID Controller & Subsystem Infortrend Operation Manual

Assigning a Name to a Logical Drive

Press ENT for two seconds to enter the
Main Menu. Press
"View and Edit Logical Drives..," then
press ENT.
Press
then press ENT.
Press
Name," then press ENT.
Press
the flashing cursor.
move the cursor to the next space. The
maximum number of characters for a
logical drive name is 25.

Rebuilding a Logical Drive

If you want the controller to auto-detect a replacement drive, make
sure you have the following items set to enabled:
1.
2.
These two configuration options can be found under "View and Edit
Configuration Parameters" -> " Drive-Side SCSI Parameters".
Press ENT for two seconds to enter the
Main Menu. Press
"View and Edit Logical Drives..", then
press ENT.
Press
that has a failed member, then press
ENT.
Press
Drive," then press ENT.
Press ENT for two seconds to start
rebuilding the logical drive.
The
displayed (as a percentage) on the
LCD.
Front Panel Operation
or to select a logical drive,
or to select "Logical Drive
or to change the character of
Periodic Drive Check Time
Periodic Auto-Detect Failure Drive Swap Check Time
or to select the logical drive
or to select "Rebuild Logical
rebuilding progress
or to select
Press ENT to
or to select
will be
View and Edit
Logical Drives
LG0 RAID5 DRV=3
2012MB GD SB=1
Logical Drive
Name ..
Enter LD Name:
_
View and Edit
Logical Drives
LG0 RAID5 DRV=3
2012MB FL SB=0
Rebuild Logical
Drive ..
Rebuild Logical
Drive
Rebuilding 25%
Please Wait!
5-18
?