Partitioning A Logical Drive/Logical Volume - Compaq External RAID Controller & Subsystem Infortrend Operation Manual

5.6 Partitioning a Logical Drive/Logical
Volume
Partitioning, as well as the creation of logical volume, are not the
requirements for creating a RAID system.
processes for partitioning a logical drive are the same as those for
partitioning a logical volume.
Press ENT for two seconds to enter the
Main Menu. Press
"View and Edit Logical Volume," then
press ENT.
Press
then press ENT.
Press
Logical Volume," then press ENT.
The total capacity of the logical volume
will be displayed as the first partition
(partition 0).
seconds to change the size of the first
partition.
Use
the flashing digit, (see the arrow mark)
then press ENT to move to the next
digit.
press ENT for two seconds to confirm
the capacity of this partition. You may
also use arrow keys to move down to
the next partition.
The rest of the drive space will be
automatically allocated as the last
partition. You may go on to create up
to 32 partitions using the same method
as described above.
Press ESC for several times to go back
to the main menu.
5-12
or
or to select a logical volume,
or to select "Partition
Press ENT for two
or to change the number of
After changing all the digits,
The configuration
View and Edit
to select
Logical Volume
LV=0 ID=685AE502
2021MB DRV=1
Partition
Logical Volume..
LV=0
LV=0
2021MB
LV=0 Part=0:
700MB
LV=0 Partition=1
1321MB
Part=0:
2021MB ?
Part=0:
?
?
Infortrend