Viewing And Editing Logical Drives And Drive Members; Deleting A Logical Drive - Compaq External RAID Controller & Subsystem Infortrend Operation Manual

NOTE:
The rebuild priority determines how much of controller resources is
conducted when rebuilding a logical drive. The default setting of the
rebuild priority is "LOW." Rebuild will have smaller impact on host I/O
access, but rebuild will take a longer time to complete. Changing the
rebuild priority to a higher level you will have a faster rebuild, but will
certainly increase the Host I/O response time. The default setting "LOW"
is recommended.
5.9 Viewing and Editing Logical Drives and
Drive Members
Press ENT for two seconds to enter the
Main Menu. Press
"View and Edit Logical Drives..," then
press ENT.
Press
then press ENT.
Press
Drives..", then press ENT .
Press
of member drives.

Deleting a Logical Drive

Press ENT for two seconds to enter the
Main Menu. Press
"View and Edit Logical Drives," then
press ENT.
Press
then press ENT.
Press
Drive," then press ENT .
Press ENT for two seconds to delete.
The selected logical drive has now
been deleted.
Front Panel Operation
or
or to select the logical drive,
or to select "View SCSI
or to scroll through the list
or
or to select a logical drive,
or to select "Delete Logical
View and Edit
to select
Logical Drives
LG0 RAID5 DRV=3
2012MB GD SB=1
View SCSI Drives
C=1 I=0
LG=0 LN SEAGATE
View and Edit
to select
Logical Drives
LG0 RAID5 DRV=3
2012MB GD SB=1
Delete Logical
Drive
LG=0
Not Defined
..
1010MB
..
?
5-16