Cleaning The Media Sensor; Cleaning The Media Holder - MIMAKI JV400-LX Series Operation Manual

Cleaning the Media Sensor

The media sensors are located on the platen in the backside and the bottom surface of the head. When the
sensor is covered with dust, etc., it may cause false detection of media.
Using a cotton swab, remove the dust, etc. accumulated on the surface of the sensor.
When cleaning the sensor on the lower surface of the head is cleaned, move the carriage to the left end by the
operations of step 1 of P.4-12 "Cleaning the Ink Head and the Area around It", and then clean it.
The backside of the machine

Cleaning the Media Holder

When the media holder is covered with lint, dust, etc., a media cannot be fed normally during printing or dust
sticks to the nozzles, which may result in abnormal printing.
Clean the media holder regularly.
4-4
Media sensor
The lower surface of the head
Media sensor
Media press
Maintenance