Media Holder Cleaning - MIMAKI JV330 Series Care And Maintenance

4
Remove the media cutter.
5
Clean both sides of the media cutter.
• Wipe off any adhesive paste, ink and dust adhering using a cleaning stick moistened with
industrial alcohol. Wipe off the maintenance liquid. Make sure none remains.
6
Once cleaning is complete, close the cover, then press the [ENTER] key.

Media Holder Cleaning

Continuing to use the dirty platen will prevent proper feeding of the media. It will also cause dried ink and
attached dust to rub against the head nozzle surface and lead to print defects (e.g., nozzle clogging,
deflection).
• Turn off the main power supply and unplug the power cable before carrying out maintenance.
• Do not allow liquids to get inside the product. Otherwise there is a risk of failure, electric shock,
or fire.
• For heavy soiling, wipe using a soft cloth soaked in dilute detergent and thoroughly wrung out.
Screw
Media holder
13
3. Maintenance Methods