Lldp Timer Tx-Interval - H3C MSR Series Command Reference Manual

Default
The LLDPDU transmit delay is 2 seconds.
Views
System view
Default command level
2: System level
Parameters
delay: Sets the LLDPDU transmit delay in the range of 1 to 8192 seconds.
Usage guidelines
It is a good practice to set the LLDPDU transmit delay to be no greater than a quarter of the LLDPDU
transmit interval.
If the LLDPDU transmit delay is greater than the LLDPDU transmit interval, the device uses the
LLDPDU transmit delay as the transmit interval.
Examples
# Set the LLDPDU transmit delay to 4 seconds.
<Sysname> system-view
[Sysname] lldp timer tx-delay 4
Related commands

lldp timer tx-interval

lldp timer tx-interval
Use lldp timer tx-interval to set the LLDPDU transmit interval.
Use undo lldp timer tx-interval to restore the default.
Syntax
lldp timer tx-interval interval
undo lldp timer tx-interval
Default
The LLDPDU transmit interval is 30 seconds.
Views
System view
Default command level
2: System level
Parameters
interval: Sets the LLDPDU transmit interval in the range of 5 to 32768 seconds.
Usage guidelines
It is a good practice to set the LLDPDU transmit interval to be no less than four times the LLDPDU
transmit delay.
If the LLDPDU transmit interval is less than the LLDPDU transmit delay, the device uses the
LLDPDU transmit delay as the transmit interval.
147