H3C MSR Series Command Reference Manual page 119

Use undo port link-aggregation group to remove the Ethernet interface from the aggregation
group to which it belongs.
Syntax
port link-aggregation group number
undo port link-aggregation group
Views
Ethernet interface view
Default command level
2: System level
Parameters
number: Specifies the number of the aggregate interface corresponding to an aggregation group.
The value range for this argument is 1 to 1024 for Layer 2 aggregate interfaces and 1 to 16 for Layer
3 aggregate interfaces.
The following matrix shows the number argument for Layer 2 aggregate interfaces and hardware
compatibility:
Hardware
MSR800
MSR 900
MSR900-E
MSR 930
MSR 20-1X
MSR 20
MSR 30
MSR 50
MSR 2600
MSR3600-51F
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR800
MSR 900
MSR900-E
MSR 930
MSR 20-1X
MSR 20
MSR 30
MSR 50
MSR 2600
Argument compatibility
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Command compatibility
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
111