Description - H3C MSR Series Command Reference Manual

description

Use description to set a description for an interface. For example, you can include information such
as the purpose of the interface for the ease of management.
Use undo description to restore the default setting.
Syntax
description text
undo description
Default
The description of an interface is interface-name Interface. For example, the default description of
Bridge-Aggregation1 is Bridge-Aggregation1 Interface.
Views
Layer 2 aggregate interface view, Layer 3 aggregate interface view, Layer 3 aggregate subinterface
view
Default command level
2: System level
Usage guidelines
The following matrix shows the command and hardware compatibility in Layer 2 aggregate interface
view:
Hardware
MSR800
MSR 900
MSR900-E
MSR 930
MSR 20-1X
MSR 20
MSR 30
MSR 50
MSR 2600
MSR3600-51F
Parameters
text: Specifies the interface description, a string of 1 to 80 characters.
Examples
# Set the description of Layer 2 aggregate interface Bridge-Aggregation 1 to connect to the lab.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab
Command compatibility
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
93