Reset Counters Interface - H3C MSR Series Command Reference Manual

Hardware
MSR3600-51F
A Layer 2 Ethernet interface can be assigned to a Layer 2 aggregation group only, and a Layer 3
Ethernet interface can be assigned to a Layer 3 aggregation group only.
An Ethernet interface can belong to only one aggregation group.
Examples
# Assign Layer 2 Ethernet interface Ethernet 1/1 to Layer 2 aggregation group 1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] port link-aggregation group 1
# Assign Layer 3 Ethernet interface Ethernet 1/2 to Layer 3 aggregation group 2.
<Sysname> system-view
[Sysname] interface ethernet 1/2
[Sysname-Ethernet1/2] port link-aggregation group 2

reset counters interface

Use reset counters interface to clear the statistics of the specified aggregate interface or
interfaces.
Syntax
reset counters interface [ { bridge-aggregation | route-aggregation } [ interface-number ] ]
Views
User view
Default command level
2: System level
Parameters
bridge-aggregation: Clears statistics for Layer 2 aggregate interfaces.
The following matrix shows the bridge-aggregation keyword and hardware compatibility:
Hardware
MSR800
MSR 900
MSR900-E
MSR 930
MSR 20-1X
MSR 20
MSR 30
MSR 50
MSR 2600
MSR3600-51F
Command compatibility
Yes
keyword compatibility
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
112