H3C MSR Series Command Reference Manual page 103

Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR800
MSR 900
MSR900-E
MSR 930
MSR 20-1X
MSR 20
MSR 30
MSR 50
MSR 2600
MSR3600-51F
If bridge-aggregation | route-aggregation is not specified, this command displays information
about all interfaces.
If bridge-aggregation or route-aggregation is specified without any interface number specified,
this command displays information about all aggregate interfaces.
If bridge-aggregation interface-number or route-aggregation interface-number is specified, this
command displays information about the specified aggregate interface.
Examples
# Display information about Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> display interface bridge-aggregation 1
Bridge-Aggregation1 current state: DOWN
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000f-e207-f2e0
Description: Bridge-Aggregation1 Interface
Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
PVID: 1
Port link-type: access
Tagged
Untagged VLAN ID : 1
Last clearing of counters:
# Display information about Layer 3 aggregate interface Route-Aggregation 1.
<Sysname> display interface route-aggregation 1
Route-Aggregation1 current state: DOWN
Line protocol current state: DOWN
Description: Route-Aggregation1 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Packet Frame Type: PKTFMT_ETHNT_2,
IPv6 Packet Frame Type: PKTFMT_ETHNT_2,
Output queue : (Urgent queuing : Size/Length/Discards)
Output queue : (Protocol queuing : Size/Length/Discards)
VLAN ID : none
Never
Command compatibility
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Hardware Address: 000f-2368-6668
Hardware Address: 000f-2368-6668
0/100/0
95
0/500/0