H3C MSR Series Command Reference Manual page 142

Field
Chassis ID
Port ID type
Port ID
System name
System description
System capabilities supported
System capabilities enabled
Management address OID
Port and protocol VLAN ID(PPVID)
Port and protocol VLAN supported
Port and protocol VLAN enabled
VLAN name of VLAN 1
Auto-negotiation supported
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Description
•
Locally assigned—Locally-defined chassis type other than
those listed above.
ID that identifies the LLDP sending device, which can be a MAC
address, a network address, an interface or some other value
depending on the chassis type.
Port ID representation:
•
Interface alias.
•
Port component.
•
MAC address.
•
Network address(ipv4).
•
Interface name.
•
Agent circuit ID.
•
Locally assigned—Locally-defined port ID type other than
those listed above.
Value of the port ID type.
System name of the neighboring device.
System description of the neighboring device.
Capabilities supported on the neighboring device:
•
Bridge—Switching is supported.
•
Router—Routing is supported.
Capabilities enabled on the neighboring device:
•
Bridge—Switching is enabled.
•
Router—Routing is enabled.
Management address object ID.
Port protocol VLAN ID.
Indicates whether protocol VLAN is supported on the port.
Indicates whether protocol VLAN is enabled on the port.
Name of VLAN 1.
Indicates whether auto-negotiation is supported on the port.
Indicates whether auto-negotiation is enabled on the port.
Speed and duplex state on the port.
PoE device type:
•
PSE—Power sourcing equipment.
•
PD—Powered device.
Indicates whether the device can operate as a PSE.
Indicates whether the device is operating as a PSE.
Indicates whether the PSE-PD pair control is available.
PoE mode:
•
Signal—PoE via signal lines.
•
Spare—PoE via spare lines.
Port power classification of the PD:
•
Class 0.
•
Class 1.
134