Operation; Guitar Controller; Mode Switch - Roland GR-77B Owner's Manual

e
e
[4] OPERATION
1. GUITAR CONTROLLER
(2) Touch Plates
1) Balance Knob (3)
2) Master Volume (B)
This knob sets the overall volume.
3) Mode Switch ©
AtIposition Only direct bass sound is
obtained, and the Balance Knob (8)
does not work.
А апаш Both direct and synthesizer
position sounds are available.
4) Vibrato Knob @ and Touch Plats (€
By using these knobs, you can add vibrato effect.
1. When using the G-33 or G-88
Slightly turn the Vibrato Knob (S) and touch the Touch
Plate А while holding the strings down. To stop vibrato,
touch the Touch Plate 8 and .mmediately release it
© Mode Switch
@ Vibrato Knob
@ Edit Knob
( Master Volume
(£ Cutoff Frequency Knob
(2) Balance Knob
r to the owner's manual of
h bass guitar con-