76: Flanger G Delay; Flanger G Delay; 77: Chorus G Flanger; Chorus G Flanger - Roland JUNO-Gi Owner's Manual

76: FLANGER g DELAY

Balance D
L in
Feedback
Balance W
Flanger
Balance W
R in
Balance D
Parameter Value
Flanger Pre Delay 0.0–100 msec
Flanger Rate # 0.05–10.00 Hz, note
Flanger Depth 0–127
Flanger Feedback #
-98–+98%
Flanger Balance # D100:0W–D0:100W
Delay Time 0–2600 msec, note
Delay Feedback # -98–+98%
Delay HF Damp 200–8000 Hz, BYPASS
Delay Balance #
D100:0W–D0:100W
Level 0–127
74
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Explanation
Adjusts the delay time from
when the direct sound begins
until the flanger sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative (-)
settings will invert the phase.
Volume balance between the
direct sound (D) and the flanger
sound (W)
Adjusts the delay time from
the direct sound until the delay
sound is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which sound fed back to the
effect will be cut. If you do not
want to cut the high frequencies,
set this parameter to BYPASS.
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Output Level

77: CHORUS g FLANGER

Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Chorus Pre Delay 0.0–100 msec
Chorus Rate # 0.05–10.00 Hz, note
Chorus Depth 0–127
Chorus Balance # D100:0W–D0:100W
Flanger Pre Delay 0.0–100 msec
Flanger Rate # 0.05–10.00 Hz, note
Flanger Depth 0–127
Flanger Feedback # -98–+98%
Flanger Balance # D100:0W–D0:100W
Level 0–127
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Explanation
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Modulation frequency of the
chorus effect
Modulation depth of the chorus
effect
Volume balance between the
direct sound (D) and the chorus
sound (W)
Adjusts the delay time from
when the direct sound begins
until the flanger sound is heard.
Modulation frequency of the
flanger effect
Modulation depth of the flanger
effect
Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative (-)
settings will invert the phase.
Adjusts the volume balance
between the sound that is sent
through the flanger (W) and the
sound that is not sent through
the flanger (D).
Output Level