Flg->Dly (Flanger 0 Delay); Cho->Flg (Chorus 0 Flanger) - Roland JD-XA Parameter Manual

66: Flg->Dly
(Flanger 0 Delay)
Balance D
L in
Feedback
Flanger
R in
Balance D
Parameter Value
Flg PreDly
0.0–100.0 ms
(Flanger Pre Delay)
Flg Sync
Hz, NOTE
(Flanger Sync)
Flg Rate # 0.05–10.00 Hz,
note
(Flanger Rate)
Flg Depth
0–127
(Flanger Depth)
FlgFeedback #
-98–+98%
(Flanger Feedback)
D100:0W–
Flg Bal #
D0:100W
(Flanger Balance)
Delay Sync
msec, NOTE
Dly Time/Note
0–2600 ms, note
(Delay Time/Note)
DlyFeedback #
-98–+98%
(Delay Feedback)
D HF Damp 200–8000 Hz,
BYPASS
(Delay HF Damp)
D100:0W–
Dly Bal #
D0:100W
(Delay Balance)
Level 0–127
67: Cho->Flg
(Chorus 0 Flanger)
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Cho PreDly
0.0–100.0 ms
(Chorus Pre Delay)
ChorusSync
Hz, NOTE
Balance D
Balance W
Balance W
Delay
Balance W
Balance W
Feedback
Balance D
Explanation
Adjusts the delay time from the
direct sound until the flanger sound
is heard.
Hz: The Flg Rate value is specified
in Hz.
NOTE:
The Flg Rate value is specified
as a note value.
Rate of modulation
Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the
effect.
Negative (-) values invert the phase.
Volume balance between the direct
sound (D) and the flanger sound (W)
msec: The Dly Time/Note value is
specified in msec.
NOTE:
The Dly Time/Note value is
specified as a note value.
Adjusts the delay time from the
direct sound until the delay sound
is heard.
Adjusts the proportion of the delay
sound that is fed back into the
effect.
Negative (-) values invert the phase.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the
high frequencies, set this parameter
to BYPASS.
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Output volume
Balance D
Feedback
Balance W
Flanger
Balance W
Balance D
Explanation
Adjusts the delay time from the
direct sound until the chorus sound
is heard.
Hz: The Cho Rate value is specified
in Hz.
NOTE:
The Cho Rate value is
specified as a note value.
Parameter
Cho Rate #
(Chorus Rate)
L out
Chorus Depth
Cho Bal #
(Chorus Balance)
R out
Flg PreDly
(Flanger Pre Delay)
Flg Sync
(Flanger Sync)
Flg Rate #
(Flanger Rate)
Flg Depth
(Flanger Depth)
FlgFeedback #
(Flanger Feedback)
Flg Bal #
(Flanger Balance)
Level
Note
Sixty-fourth-note
triplet
Sixteenth-note
triplet
Dotted sixteenth
note
Quarter note
Whole-note triplet
Dotted whole note
L out
R out
53
Value Explanation
0.05–10.00 Hz, Modulation frequency of the chorus
note effect
Modulation depth of the chorus
0–127
effect
D100:0W– Volume balance between the direct
D0:100W sound (D) and the chorus sound (W)
Adjusts the delay time from the
0.0–100.0 ms direct sound until the flanger sound
is heard.
Hz:
The Flg Rate value is specified
in Hz.
Hz, NOTE
NOTE:
The Flg Rate value is specified
as a note value.
0.05–10.00 Hz, Modulation frequency of the flanger
note effect
Modulation depth of the flanger
0–127
effect
Adjusts the proportion of the flanger
sound that is fed back into the
-98–+98%
effect.
Negative (-) values invert the phase.
Adjusts the volume balance
between the sound that is sent
D100:0W–
through the flanger (W) and the
D0:100W
sound that is not sent through the
flanger (D).
0–127 Output volume
Thirty-second-note
Sixty-fourth note
triplet
Dotted thirty-
Sixteenth note
second note
Eighth note Quarter-note triplet
Half-note triplet Dotted quarter note
Dotted half note Whole note
Double note
Effects
Thirty-second note
Eighth-note triplet
Dotted eighth note
Half note
Double-note triplet