Ep Phaser; Ep Delay; Enhancer Chorus - Roland AX-Edge Parameter Manual

Hide thumbs Also See for AX-Edge:
Table of Contents

Advertisement

MFX/IFX Parameters
64 EP 0 PHASER
L in
EP Amp
EP Amp
Speaker
Speaker
R in
Parameter
Value
OLDCASE
Type
NEWCASE
Bass
-50–+50
Treble
-50–+50
Phs Switch
OFF, ON
(Phaser Switch)
Phs Sync
OFF, ON
(Phaser Rate (sync switch))
Phs Hz
0.05–10.00 [Hz]
(Phaser Rate (Hz))
Note
Phs Note
&
"Note"
(Phaser Rate (note))
(p. 72)
Phs Manual
0–127
(Phaser Manual)
Phs Depth
0–127
(Phaser Depth)
Phs Reso
0–127
(Phaser Resonance)
Phs Mix
0–127
(Phaser Mix)
LINE, OLD, NEW,
Sp Type
(Speaker Type)
WURLY, TWIN
OD Switch
OFF, ON
(Overdrive Switch)
OD Gain
0–127
(Overdrive Gain)
OD Drive
0–127
(Overdrive Drive)
Level
0–127
65 EP 0 DELAY
L in
EP Amp
EP Amp
Speaker
Speaker
R in
Parameter
Value
OLDCASE
Type
NEWCASE
Bass
-50–+50
Treble
-50–+50
Dly Switch
OFF, ON
(Delay Switch)
Dly Sync
(Delay Time
OFF, ON
(sync switch))
Dly Msec
1–1300 [msec]
(Delay Time (msec))
Note
Dly Note
&
"Note"
(p. 72)
(Delay Time (note))
L out
Phaser
Phaser
Mix
Resonance
R out
Explanation
Type of amp
A standard electric piano sound of the
early 70s
A standard electric piano sound of the
late 70s and early 80s
Amount of low-frequency boost/cut
Amount of high-frequency boost/cut
Phaser on/off
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
"Tempo"
(p. 8)
Frequency of modulation
Adjusts the basic frequency from which
the sound will be modulated.
Depth of modulation
Amount of feedback
Level of the phase-shifted sound
Type of speaker
If LINE is selected, the sound will not be
sent through the speaker simulation.
Overdrive on/off
Overdrive input level
Degree of distortion
Output Level
Balance D
L out
Balance W
Time Ctrl
Time Ctrl
Delay
Delay
Balance W
Feedback
R out
Balance D
Explanation
Type of amp
A standard electric piano sound of the
early 70s
A standard electric piano sound of the
late 70s and early 80s
Amount of low-frequency boost/cut
Amount of high-frequency boost/cut
Delay on/off
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
"Tempo"
(p. 8)
Adjusts the delay time from the direct
sound until the delay sound is heard.
Parameter
Value
Dly Accel
0–15
(Delay Accel)
Dly Fbk
-98–+98 [%]
(Delay Feedback)
200, 250, 315, 400,
500, 630, 800,
1000, 1250, 1600,
Dly HF
(Delay HF Damp)
2000, 2500, 3150,
4000, 5000, 6300,
8000, BYPASS [Hz]
D100: 0W–D0:
Dly Bal
(Delay Balance)
100W
LINE, OLD, NEW,
Sp Type
(Speaker Type)
WURLY, TWIN
OD Switch
OFF, ON
(Overdrive Switch)
OD Gain
0–127
(Overdrive Gain)
OD Drive
0–127
(Overdrive Drive)
Level
0–127
66 ENHANCER 0 CHORUS
L in
Enhancer
Enhancer
R in
Enhancer
Enhancer
Parameter
Value
Enh Sens
0–127
(Enhancer Sens)
Enh Mix
0–127
(Enhancer Mix)
Cho PreDly
0.0–100 [msec]
(Chorus Pre Delay)
Cho Sync
OFF, ON
(Chorus Rate (sync switch))
Cho Hz
0.05–10.00 [Hz]
(Chorus Rate (Hz))
Note
Cho Note
&
(Chorus Rate (note))
"Note"
Cho Depth
0–127
(Chorus Depth)
D100: 0W–D0:
Cho Bal
100W
(Chorus Balance)
Level
0–127
66
Explanation
Speed at which the current delay time
changes to the specified delay time when
you change the delay time.
The speed of the pitch change will
change simultaneously with the delay
time.
Adjusts the proportion of the delay sound
that is fed back into the effect.
Negative (-) settings will invert the phase.
Frequency at which the high-frequency
portion of the delay sound will be cut
(BYPASS: no cut)
Adjusts the volume balance between the
sound that is sent through the delay (W)
and the sound that is not sent through
the delay (D).
Type of speaker
If LINE is selected, the sound will not be
sent through the speaker simulation.
Overdrive on/off
Overdrive input level
Degree of distortion
Output Level
Balance D
Mix
Chorus
Chorus
Mix
Balance D
Explanation
Sensitivity of the enhancer
Level of the overtones generated by the
enhancer
Adjusts the delay time from the direct
sound until the chorus sound is heard.
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
"Tempo"
(p. 8)
Frequency of modulation
(p. 72)
Depth of modulation
Adjusts the volume balance between the
sound that is sent through the chorus (W)
and the sound that is not sent through
the chorus (D).
Output Level
L out
Balance W
Balance W
R out

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents