Step 7: Save The Settings; Save The User Settings - JAI SW-4010Q-MCL-M52 User Manual

SW-4010Q-MCL-M52 User Manual (Tentative)

Step 7: Save the Settings

Related Setting Items:
The configured setting values will be deleted when the camera is turned off. By saving current
setting values to user memory, you can load and recall them whenever necessary. You can save
up to three sets of user settings in the camera. (User Set1 to 3)

Save the User Settings

1. Stop image acquisition. Settings can only be saved when image acquisition on the camera
is stopped.
2. Specify the storage location (UserSet1 - UserSet3) using the UserSetSave command and
save the current camera settings.
For more information, see the following Short ASCII command table.
Item
UserSetSave
UserSetControl
Short ASCII
Values
Command
1:User1
SA 2:User2
3:User3
Command Examples
SA=[Param.]<CR><LF>
SA?<CR><LF>
- 35 -
Preparation