SW-4010Q-MCL-M52 User Manual (Tentative)
Encoder Control Item
NonDecimationEncode
IntervalMax
UserSetControl
Configure user settings.
Related Topic:
Step 7: Save the Settings
User Set Control
Setting
Item
Range
UserSetSelector
UserSetLoad
UserSetSave
Setting
Default
Range
Value
Enables external setting of the upper limit of the internal frequency calculation result
so that the period of the output frequency is no longer than the user-specified period.
0: none (no max)
1: 1 sec max
2: 2 sec max
3: 3 sec max
-
0
4: 4 sec max
5: 5 sec max
6: 6 sec max
7: 7 sec max
8: 8 sec max
9: 9 sec max
10: 10 sec max
Default
Value
Select the user settings.
0: Default - Invalid when executing UserSetSave
-
0: Default
1: User1
2: User2
3: User3
Read the user settings. When selecting Default for UserSetSelector, the
-
-
factory settings are loaded.
Save the current setting values as user settings. Invalid when
-
-
UserSetSelector is set to Default.
Description
Description
- 85 -
Setting List