To Use The Shading Correction Function; Black Level Correction - JAI SW-4010Q-MCL-M52 User Manual

Rgb color & swir prism line scan camera with mini camera link interface

Table of Contents

SW-4010Q-MCL-M52 User Manual (Tentative)

To Use the Shading Correction Function

The function is turned ON/OFF via serial communication. This function is not dependent on the

operation mode but is effective when used during actual use.

Note: You can save the setting, and have it applied whenever the power is subsequently

turned on. For details on saving the setting, see

RGB

1. Select the shading correction mode (FlatShading or ColorShading) in

ShadingCorrectionMode.

2. In ShadingMode, select the user area (User1 - 3) where you save the shading correction

data.

Note: You cannot perform calibration when Off is selected.

3. Display a white chart under a uniform light and execute PerformShadingCalibration.

SWIR

The correction mode is fixed to FlatShading

1. In SWIRShadingCorrect, select User where you save the shading correction data.

Note: You cannot perform calibration when Off or Factory is selected.

2. Display a white chart under a uniform light and execute SWIRShadingCalibration.

Related Setting Items: AnalogControl,

Black level correction is a function for adjusting the setup level. When this function is used, the

following is performed for the gain mode setting.

All: –133 ~ +255 LSB@12-bit

Red: –64 ~ +64 LSB@12-bit

Blue: –64 ~ +64 LSB@12-bit

Note: For more information see

RGB

Adjust the Black

Step 7: Save the

SWIRAnalogControl

All: - 256 ~ + 255 LSB@12bit

Level.

- 57 -

Main Functions

Settings.

SWIR

Table of Contents