Swircorrectioncontrol - JAI SW-4010Q-MCL-M52 User Manual

SW-4010Q-MCL-M52 User Manual (Tentative)

SWIRCorrectionControl

Configure settings related to the correction function for nonuniformity in black levels and gain
between pixels for the SWIR channel.
SWIR Correction Control Item
SWIRPixelBlackCorrect
Related Topic: DSNU
Correction (Pixel Black Correct)
SWIRPixelBlackCalibration
SWIRPixelBlackCalibrationResult
SWIRPixelGainCorrect
Related Topic: PRNU
Correction (Pixel Gain Correct)
SWIRPixelGainCalibration
SWIRPixelGainCalibrationResult
SWIRNoiseReduction
Related Topic: Noise
Reduction Filter Functions
Setting
Default Value
Range
0: Off
1: Factory 0: Off
2: User
-
0: Pixel black correction has
-
not been finished yet.
0: Off
1: Factory 0: Off
2: User
-
0:Pixel gain correction has
-
not been finished yet.
0: Off
0: Off
1: On
- 97 -
(DSNU) Select the area to which to save the
pixel black correction value.
Note: Factory stores correction data with factory
settings.
(DSNU) Generate black level correction data
-
automatically from the captured image.
(DSNU) Display the results of
SWIRPixelBlackCalibration execution.
0: Pixel black correction has not been finished
yet.
1: Succeeded.
2: Error1 –Image was too bright.
3: Error2 –Image was too dark.
4: Error3 –Timeout occurred.
(PRNU) Select the area to which to save the
pixel gain correction value.
Note: Factory stores correction data with factory
settings.
(PRNU) Generate gain correction data
-
automatically from the captured image.
(PRNU) Display the results of
SWIRPixelGinCalibration execution.
0: Pixel gain correction has not been finished
yet.
1: Succeeded.
2: Error1 –Image was too bright.
3: Error2 –Image was too dark.
4: Error3 –Timeout occurred.
Enable / Disable SWIRNoiseReduction.
Setting List
Description