JAI SW-4010Q-MCL-M52 User Manual page 91

SW-4010Q-MCL-M52 User Manual (Tentative)
Correction Control Item
ChromaticAberration
CorrectionMode
Related Topic: Chromatic Aberration
Correction
ChromaticAberration
CorrectionSelector
ChromaticAberrationCorrectionLens1
(pixel)
ChromaticAberrationCorrectionLens2
(pixel)
ChromaticAberrationCorrectionLens3
(pixel)
FIRFilterSelector
Related Topic: Noise Reduction Filter
Functions
FIRFilterMode
FIRFilterLeftRatio
FIRFilterCenterRatio
FIRFilterRightRatio
MEDIANFilterSelector
MEDIANFilterMode
NoiseReduction
Setting Default
Range Value
0: Off
1:Lens1 Correct the color aberration that occurs at the left and
0: Off
right edges due to lens characteristics.
2:Lens2
3:Lens3
0: R Channel Specify the channel for which to perform
0
ChromaticAberration CorrectionLens1, 2, 3.
1: B Channel
Set the amount of correction for
ChromaticAberrationCorrectionLens1.
-4.0 ~ 4.0 0.0
Step: 0.1
Set the amount of correction for
ChromaticAberrationCorrectionLens2.
-4.0 ~ 4.0 0.0
Step: 0.1
Set the amount of correction for
ChromaticAberrationCorrectionLens3.
-4.0 ~ 4.0 0.0
Step: 0.1
0:Red
Select the target to apply FIR Filter from Red, Green,
1:Green 0:Red
Blue.
2:Blue
0: Off
0: Off Enable / Disable FIR Filter.
1: On
Set the coefficient of the left pixel when FIR Filter is
-2 ~ 2 0
applied.
Set the coefficient of the center pixel when FIR Filter is
-2 ~ 2 1
applied.
Set the coefficient of the right pixel when FIR Filter is
-2 ~ 2 0
applied.
0:Red
Select the target to apply MEDIAN Filter from Red,
1:Green 0:Red
Green, Blue.
2:Blue
0: Off
0: Off Enable / Disable MEDIAN Filter.
1: On
0: Off
1:Level1 Set the noise reduction intensity in 4 levels. Level1 =
0: Off
weak, Level4 = strong.
2:Level2
3:Level3
- 91 -
Setting List
Description