Gpio (Digital Input/Output Settings) - JAI SW-4010Q-MCL-M52 User Manual

SW-4010Q-MCL-M52 User Manual (Tentative)

GPIO (Digital Input/Output Settings)

Related Setting Items:
The camera can input/output the following signals to and from external input/output connectors.
External Output
External Input
These signals can be used as triggers and other necessary signals within the camera or as
signals output from the camera to the system, such as those used for lighting equipment control.
Signals are selected as follows.
When using external signals or the signals of each GPIO module as trigger signals: Select
l
in TriggerSource (AcquisitionControl), SWIRTriggerSource (SWIRAcquisitionControl)
When selecting the signals to use for external outputs: Select in LineSource
l
(DigitalIOControl).
You can verify the LineMode and LineFormat status, and configure the LineInverter
setting. You can also verify each Digital IO's status using the LineStatusAll setting (table
below):
LineSelector
TTL OUT 1 (Line 1)
TTL OUT 4 (Line 12)
TTL OUT2 (Line 8)
TTL OUT3 (Line 9)
OPT IN1 - (Line 5)
OPT IN1 + (Line 5)
TTL IN 1 (Line 4)
TTL IN2 (Line 10)
TTL IN3 (Line 13)
Nand0In1
Nand0In2
Nand1In1
Nand1In2
DigitalIOControl
TTL OUT 1 (Line 1)
TTL OUT 4 (Line 12)
TTL OUT2 (Line 8)
TTL OUT3 (Line 9)
OPT IN1 - (Line 5)
OPT IN1 + (Line 5)
TTL IN 1 (Line 4)
TTL IN2 (Line 10)
TTL IN3 (Line 13)
CC1 (Line 7)
LineMode
Output TTL
OptoCoupled
TTL
Input
Internal Signal
DC IN / TRIG IN Connector (12-pin)
AUX Connector (10-pin)
DC IN / TRIG IN Connector (12-pin)
AUX Connector (10-pin)
Camera Link Cable
LineFormat LineInverter
True/False
True/False
True/False
True/False
False (Fixed)
False (Fixed)
False (Fixed)
False (Fixed)
False (Fixed)
True/False
True/False
True/False
True/False
- 39 -
Main Functions
LineStatusAll
bit0
bit11
bit7
bit8
bit4
bit4
bit3
bit9
bit12