Step 5:Changing The Camera Settings - JAI GO-5100MP-USB User Manual

Step 5: Changing the Camera Settings
This section explains how to change settings by describing the procedure for changing the
output format as an example.
Configuring the Output Format
Configure the size, position, and pixel format of the images to be acquired.
The factory settings are as follows. Change the settings as necessary.
Factory default values
ImageFormatControl
* You can specify the image acquisition area. For details, see "ROI (Regional Scanning Function)".
1
Configuring the [Width] of［ImageFormatControl］
By selecting the item of [Width], you can change the value as shown below.
Note
Depending on the setting item, you need to change visibility.
Please switch visibility (Beginner / Expert / Guru) as necessary.
Item
Width
Height
OffsetX (horizontal position)
OffsetY (vertical position)
PixelFormat
— 17 —
GO-5100MP-USB
Default value
2464
2056
0
0
Mono8