Camera Output Formats - JAI SW-4010Q-MCL-M52 User Manual

SW-4010Q-MCL-M52 User Manual (Tentative)
For digital output, set the output source signal using LineSource. Set the source signal in the
same way for NAND Logic (Nand0In1, Nand0In2, Nand1In1, Nand1In2).
Note: For more information on the combinations of source signals and output destinations,
see Basic Function

Camera Output Formats

Related Setting Items: ImageFormatControl,
This camera supports the following output format:
Channel
RGB RGB8, RGB10BasePacked*, RGB12BasePacked*
SWIR Mono8, Mono10, Mono12
The PixelFormat setting on the camera side and the frame grabber board side must match. For
details on frame grabber board settings, refer to the instruction manual of the board.
Caution: *The RGB10BasePacked and RGB12BasePacked formats are customized pixel
formats for the Camera Link interface. To view image output in this format, a viewer that
supports these formats is required.
Matrix.
PixelFormat
SWIRImageFormatControl
- 40 -
Main Functions
Camera Link Connector
1
2