Swirblemishcontrol - JAI SW-4010Q-MCL-M52 User Manual

SW-4010Q-MCL-M52 User Manual (Tentative)

SWIRBlemishControl

Configure settings for JAI white blemish correction for the SWIR channel.
Related Topic: Defective Pixel Correction
SWIR Blemish Control Item
SWIRBlemishCorrect
SWIRBlemishThreshold
SWIRBlemishDetect
SWIRBlemishDetectResult
SWIRBlemishIndex
SWIRBlemishPosition
Setting Default
Range Value
0: Off
0: Off
1: On
1 ~ 100 1
- -
- 5: Idle
1 ~ 8 -
0 ~ 1024 1
Enable/disable blemish correction.
Set the blemish correction threshold.
Execute blemish detection.
Display the blemish correction results.
1: Succeeded.
2: Error1 –Image was too bright.
3: Error2 –Image was too dark.
4: Error3 –Timeout occurred.
5: Idle
Select the index for the target blemish position.
Display the position of the target blemish selected in
SWIRBlemishIndex. You can also manually enter the position of the
blemish you want to correct.
- 98 -
Setting List
Description