JAI SW-4010Q-MCL-M52 User Manual page 77

SW-4010Q-MCL-M52 User Manual (Tentative)
Analog Control Item
BlackLevelSelector
Related Topic:
Adjust the Black
Level
BlackLevel
BalanceWhiteAuto
Related Topic:
Adjust the White
Balance
AWBAreaWidth
AWBAreaOffsetX
AWBOnceStatus
Default
Setting Range
Value
0: All
1: Red 0: All
2: Blue
- 0
- 0: Off
- -
- 5:Idle
Select the black level to configure.
Set the black level value.
All: Min = -133, Max = 255
Red: Min = -64, Max=64
Blue: Min = -64, Max=64
Enable/disable auto white balance. When set to Once, the automatic
adjustment will be performed only once, and then automatically switched
to Off.
Note: In IndividualGainMode, BalanceWhiteAuto cannot be set
automatically.
0: Off
2: Once
4: Exposure Once
6: Preset 5000K
7: Preset 6500K
8: Preset 7500K
When BalanceWhiteAuto is set to Once, specify the width of the
reference area.
Min: 16(8)*
Max:4096
Step: 16(8)*
*When BinningHorizontal = 2, the value in parenthesis is applicable.
When BalanceWhiteAuto is set to Once, specify the offset of the
reference area.
Min: 0
Max: WidthMax - AWBWidth
Step: 16(8)*
*When BinningHorizontal = 2, the value in parenthesis is applicable.
When BalanceWhiteAuto is set to Once, display the status.
1:Succeeded
2:Error1- G image was too bright
3:Error2 - G image was too dark
4:Error3 - Timeout
5:Idle
- 77 -
Description
Setting List