Imageformatcontrol - JAI SW-4010Q-MCL-M52 User Manual

SW-4010Q-MCL-M52 User Manual (Tentative)

ImageFormatControl

Configure image format settings for the RGB channels.
Image Format Control Item
WidthMax
Width
Height
OffsetX
BinningHorizontalMode
BinningHorizontal
BinningVerticalMode
BinningVertical
ImageScalingMode
Related Topic: Image
Scaling Mode (Xscale)
ImageScalingSumMode
Setting Default
Range Value
- 4096
- 4096
- 1
0 ~ WidthMax
0
- Width
0:Sum
0:Sum
1:Average
1 ~ 2 1
0:Sum (Fixed) 0:Sum
1 ~ 2 1
- 0:Off
0:Off (Ave)
0:Off (Ave)
1:On (Sum)
- 72 -
Description
Display the maximum image width.
Default: 4096
ImageScalingMode = Off :
- BinningHorizontal=1: 4096, BinningHorizontal=2: 2048
ImageScalingMode = other than Off:
- WidthMax = ImageScalingWidthMax
Set the image width.
Max: WidthMax - OffsetX
Min,Step:
- Normal: 16
- BinningHorizontal=2: 8
- ImageScalingMode =On: 8
Display the image height.
Set the horizontal offset.
Max: WidthMax - Width
Step: 16 (8)
Note: When BinningHorizontal = 2 or ImageScalingMode enabled,
the value in parentheses is applicable.
Set the processing method for horizontal binning.
Note: Refer to the blog post on how to use the binning function:
https://news.jai.com/blog/pixel-binning.
Set the number of pixels in the horizontal direction for which to
perform binning.
Display the processing method for vertical binning.
Set the number of pixels in the vertical direction for which to
perform binning.
Enable ImageScalingMode.
0:Off
1: On
2: SWIRPixelMode
3: SWIRHalfPixelMode
Select whether to use Sum or Average mode when
ImageScalingMode is enabled.
Setting List