Adjust The Black Level; Step 7: Save The Settings - JAI GO-5000M-PGE User Manual

Cmos digital progressive scan monochrome and monochrome uv camera with gige interface

Hide thumbs Also See for GO-5000M-PGE:

Table of Contents

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)

Preparation

Adjust the Black Level

1. Configure the BlackLevel setting (setting range: -256 ~ +255). On this camera,

BlackLevelSelector is fixed to DigitalAll.

The configured setting values will be deleted when the camera is turned off. By saving current setting

values to user memory, you can load and recall them whenever necessary. You can save up to three

sets of user settings in the camera. (User Set1 to 3)

- 27 -

Table of Contents

Go-5000m-pge-uv