Lut (Lookup Table); To Use The Lut Function - JAI SW-4010Q-MCL-M52 User Manual

SW-4010Q-MCL-M52 User Manual (Tentative)

LUT (Lookup Table)

Related Setting Items:
The LUT function is used to generate a non-linear mapping between signal values captured on
the sensor and those that are output from the camera. On this camera, you can specify the output
curve using 257 setting points (indexes) for the RGB channels and 256 setting points (indexes)
for the SWIR channel.

To Use the LUT Function

Configure the settings as follows.
RGB
Setting Value /
Item
Selectable Range
LUTSelector Red, Green, Blue
LUTIndex 0 ~ 256
LUTValue 0 ~ 4095
SWIR
Item
SWIRLUTSelector
SWIRLUTIndex
SWIRLUTValue
LUTControl
Select the LUT channel to control.
Select the LUT index to configure. Indexes represent the
possible pixel values captured on the sensor, from the lowest
value (Index 0) to the highest (Index 256).
For example, Index 0 represents a full black pixel and Index 256
represents a full white pixel.
Set the LUT output value for the selected index.
Setting Value /
Selectable Range
Luminance (Fixed)
0 ~ 255
0 ~ 4095
Description
Display the LUT data type.
Select the LUT index to configure. Indexes represent the
possible pixel values captured on the sensor, from the
lowest value (Index 0) to the highest (Index 255).
For example, Index 0 represents a full black pixel and
Index 255 represents a full white pixel.
Set the LUT output value for the selected index.
- 54 -
Main Functions
Description