Correctioncontrol - JAI SW-4010Q-MCL-M52 User Manual

SW-4010Q-MCL-M52 User Manual (Tentative)

CorrectionControl

Configure settings related to the correction function for nonuniformity in black levels and gain
between pixels (RGB channels -PRNU/DSNU).
Correction Control Item
PixelBlackCorrectionMode
Related Topic: DSNU Correction (Pixel
Black Correct)
PerformPixelBlackCalibration
PixelBlackDetectResult
PixelGainCorrectionMode
Related Topic: PRNU Correction (Pixel
Gain Correct)
PerformPixelGainCalibration
PixelGainDetectResult
Setting Default
Range Value
0: Off
(DSNU) Select the user area to which to save the black
1: Default
level correction value.
1: Default
2: User1
3: User2
4: User3
(DSNU) Generate black level correction data
automatically from the captured image.
- -
(DSNU) Display the results of
PerformPixelGainBlackCalibration execution.
1: Succeeded
- 5: Idle
2: Image too bright
3: Image too dark
4: Timeout error
5: Idle
0: Off
(PRNU) Select the user area to which to save the gain
1: Default
correction value.
1: Default
2: User1
3: User2
4: User3
(PRNU) Generate gain correction data automatically
from the captured image.
- -
(PRNU) Display the results of
PerformPixelGainCalibration execution.
1: Succeeded
- 5: Idle
2: Image too bright
3: Image too dark
4: Timeout error
5: Idle
- 90 -
Description
Note: Default stores correction data with factory settings.
Caution: When PixelBlackCorrectionMode is set to Off
or Default and a test pattern is being output instead of an
image, this command cannot be executed.
Note: Default stores correction data with factory settings.
Caution: When PixelGainCorrectionMode is set to Off or
Default and a test pattern is being output instead of an
image, this command cannot be executed.
Setting List