JAI SW-4010Q-MCL-M52 User Manual page 32

SW-4010Q-MCL-M52 User Manual (Tentative)
SWIR
1. Select User to save the gain correction value with SWIRPixelGainCorrect.
Note: You cannot perform calibration when Off or Factory is selected.
2. Gain correction data is automatically generated by SWIRPixelGainCalibration and saved
in the user area specified in step 1.
3. You can check the execution result of gain correction by
SWIRPixelGainCalibrationResult.
For more information, see the following Short ASCII command table.
Item
SWIRPixelGainCorrect
SWIRPixelGainCalibration
SWIRPixelGainCalibrationResult IRPGS
Short ASCII
Command
0:Off (Default)
IRPGC 1:Factory
2:User
IRPGR
0: Pixel black correction has not been finished
yet.
1: Succeeded.
2: Error1 –Image was too bright.
3: Error2 –Image was too dark.
4: Error3 –Timeout occurred.
Values
-
- 32 -
Preparation
Command
Examples
IRPGC=
[Param.]<CR><LF>
IRPGC?<CR><LF>
Note: Factory stores
correction data with
factory settings.
IRPGR<CR><LF>
IRPGS?<CR><LF>