Swirshadingcontrol - JAI SW-4010Q-MCL-M52 User Manual

SW-4010Q-MCL-M52 User Manual (Tentative)

SWIRShadingControl

Configure shading correction settings for the SWIR channel.
Related Topic: Shading Correction
SWIR Shading Control Item
SWIRShadingCorrect
SWIRShadingCalibration
SWIRShadingCalibrationResult
SWIRShadingDataIndex
SWIRShadingData
SWIRShadingDataUpdate
SWIRShadingDataSave
Setting
Default Value
Range
0: Off
1: Factory 0: Off
2: User
- -
0: Shading correction
- has not been finished
yet.
1 ~ 1024 1
0 ~ 65535 0
- -
- -
Set the area to which to save shading correction data.
When this is set to Off, SWIRShadingCalibration will not
be executed.
Note: Factory stores correction data with factory settings.
Execute shading calibration.
Display the shading correction results.
0: Shading correction has not been finished yet.
1: Succeeded.
2: Error1 –Image was too bright.
3: Error2 –Image was too dark.
4: Error3 –Timeout occurred.
Set the number of shading correction index tables.
Set the shading correction data.
Make shading data reflect on video.
Save data to be stored in Flash in the area specified by
SWIRShadingCorrect.
- 96 -
Setting List
Description