Miscellaneous; Troubleshooting; Power Supply And Connections; Image Display - JAI SW-4010Q-MCL-M52 User Manual

Rgb color & swir prism line scan camera with mini camera link interface

Table of Contents

SW-4010Q-MCL-M52 User Manual (Tentative)

Miscellaneous

Check the following before requesting help. If the problem persists, contact your local JAI

distributor.

Issue: The POWER/TRIG LED remains lit amber and does not turn green, even after power is

supplied to the camera.

Cause and Solution: Camera initialization may not be complete due to lack of power. Check the

Camera Link cable or 6-pin power cable connection.

Issue: Gradation in dark areas is not noticeable.

Cause and Solution: Use the gamma function to correct the display. As the light-emitting

properties of the monitor are not linear, the entire image may be darker or the gradation in the

dark areas may be less noticeable when camera outputs are displayed without processing. Using

the gamma function performs correction to produce a display that is close to linear. For details,

see

Gamma

Function.

Issue: Settings cannot be saved to user memory.

Cause and Solution: You cannot save to user memory while images are being acquired by the

camera. Stop image acquisition before performing the save operation.

Issue: I want to restore the factory default settings.

Cause and Solution: Load Default under User Set Selector in the Feature Properties tab to

restore the factory default settings.

- 99 -

Table of Contents