Adjust The Black Level - JAI SW-4010Q-MCL-M52 User Manual

SW-4010Q-MCL-M52 User Manual (Tentative)

Adjust the Black Level

Black level correction is a function for adjusting the setup level.
1. Configure the RGB channels' black level with BlackLevel.
2. Configure the SWIR channel's black level with SWIRBlackLevel.
For more information, see the following Short ASCII command table.
Item
RGB BlackLevel
SWIR SWIRBlackLevel
Short ASCII
Values
Command
All: -133 ~ 255
All: BL Red: -64 ~ 64
Red: BLR Blue: -64 ~ 64
Blue: BLB Default = 0 (All,
Red, Blue)
-256 ~ 255
IRBL1S
Default: 0
- 33 -
Command Examples
When setting All:
BL=[Param.]<CR><LF>
BL?<CR><LF>
IRBL1S=[Param.]<CR><LF>
IRBL1S?<CR><LF>
Preparation