Black Level Control; Gain Control - JAI GO-5000M-PGE-UV User Manual

Cmos digital progressive scan monochrome uv camera

Hide thumbs Also See for GO-5000M-PGE-UV:

Table of Contents

Black level control

This function adjusts the setup level.

Black Level Selector

The following factors can be set.

GO-5000M-PGE-UV: DigitalAll

Black Level

The black level can be set in the following range.

GO-5000M-PGE-UV: DigitalAll：-256～ +255

In the GO-5000M-PGE-UV, the gain control uses Analog Base Gain and Digital Gain.

Analog Base Gain can be set at 0dB, +6dB or +12dB.

The digital gain is used for the master gain setting.

For setting the gain,

1. Set analog gain (Select from 0dB, +6dB and +12dB)

2. Set digital gain

The master gain (DigitalAll) can be set x1 (0dB) to x16 (+24dB) against the analog

base gain. The resolution for gain setting is x0.01/step which is 0.05dB to 0.08dB,

depending on the setting value.

The master gain control uses Digital Gain Control. All digital gain can be set by x0.01/step. If the

digital gain is set too high, gaps in the Histogram may occur

— 49 —

GO-5000M-PGE-UV

Table of Contents