Renewing Crankshaft Oil Seal - Pulley End - Volkswagen Golf 2004 Workshop Manual

2.2

Renewing crankshaft oil seal - pulley end

Special tools and workshop
equipment required
♦ Oil seal extractor -3203-
♦ Counterhold tool -3415-
♦ Assembly tool -T10053-
♦ Torque wrench (5...50 Nm)
-V.A.G 1331-
♦ Torque wrench (40...200
Nm) -V.A.G 1332-
Removing
– Remove poly V-belt
– Remove toothed belt
– Remove crankshaft toothed belt pulley. To do this, lock tooth‐
ed belt pulley using counterhold -3415- .
– To guide oil seal extractor -3203- , screw central bolt by hand
into crankshaft to stop.
– Unscrew inner part of oil seal extractor two turns (approx. 3
mm) out of outer part and lock with knurled screw.
– Oil threaded head of oil seal extractor.
Golf 2004 ➤ , Golf Plus 2005 ➤ , Passat 2006 ➤ , Touran 2003 ➤
4-cylinder diesel engine (2.0 l engine, 4 valve) - Edition 02.2011
⇒ page 16 .
⇒ page 51 .
2. Removing and installing sealing flange and flywheel
33