Volkswagen Golf 2004 Workshop Manual page 206

Golf 2004 ➤ , Golf Plus 2005 ➤ , Passat 2006 ➤ , Touran 2003 ➤
4-cylinder diesel engine (2.0 l engine, 4 valve) - Edition 02.2011
– Open locking ring using wrench -T10202- .
– Pull fuel gauge sender 2 -G169- upwards slightly and unclip
locking lugs -arrows- of suction-jet pump.
Installing
Caution
When installing do not bend fuel gauge sender 2 -G169- float
arm.
– Place fuel gauge sender 2 -G169- in fuel tank.
– Fit suction-jet pump on sender on inside of fuel tank. Suction-
jet locking lugs -arrows- must engage.
The remaining installation steps are carried out in the reverse se‐
quence. In the process, note the following:
♦ Moisten seal with fuel only when installing flange.
– Observe installation position of flange -B-:
The marking on the flange must align with the marking on the fuel
tank -arrow-.
Note
The marking on the fuel tank is not clearly visible.
B - Fuel gauge sender 2 -G169- flange
– Tighten locking ring using wrench -T10202- . Specified torque:
110 Nm.
200
Rep. gr.20 - Fuel supply system