Volkswagen Golf 2004 Workshop Manual page 62

Golf 2004 ➤ , Golf Plus 2005 ➤ , Passat 2006 ➤ , Touran 2003 ➤
4-cylinder diesel engine (2.0 l engine, 4 valve) - Edition 02.2011
– Remove securing bolts from assembly mounting/engine sup‐
port -arrows- and remove complete assembly mounting.
Note
The assembly mounting may only be removed if the engine is
♦
supported with support bracket 10-222A!
The engine support must only be loosened when the assembly
♦
mounting has been removed.
WARNING
When raising and lowering engine using support bracket
-10-222A- , ensure that no components or hoses are damaged,
strained or torn off.
– Raise engine with support bracket -10-222A- until both upper
bolts of engine support can be loosened and removed.
– Lower engine with support bracket -10-222A- until lower bolt
can be loosened and removed.
Note
The engine support can be removed only when toothed belt is
slack.
– Mark direction of rotation of toothed belt.
– Loosen camshaft pulley securing bolts -1 and 2- until camshaft
pulleys can be turned in elongated holes.
– Lock hubs using locking pin -3359- . To do this, slide locking
pins through outer free elongated holes into holes in cylinder
head.
– Loosen tensioning roller securing nut.
– Turn pin wrench -T10020- anti-clockwise until toothed belt
tensioning roller can be locked with locking pin -T10115- .
56
Rep. gr.15 - Cylinder head, valve gear