Volkswagen Golf 2004 Workshop Manual page 34

Golf 2004 ➤ , Golf Plus 2005 ➤ , Passat 2006 ➤ , Touran 2003 ➤
4-cylinder diesel engine (2.0 l engine, 4 valve) - Edition 02.2011
– Clamp assembly device -T10134- in a vice on clamping sur‐
face -A- of threaded spindle.
– Press assembly housing -C- downwards so that it lies on hex‐
agon nut -B- -arrow-.
– Screw hexagon nut onto threaded spindle until inner part of
assembly device and assembly housing are level.
– Remove securing clip -arrow- from new sealing flange.
Note
The sender wheel must not be taken out of the sealing flange or
twisted.
– Locating hole -A- on sender wheel -C- must align with marking
-B- on sealing flange.
– Place sealing flange with front side downwards on a clean flat
surface.
– Push sealing lip support ring -A- downwards in direction of ar‐
row until it lies on flat surface.
28
Rep. gr.13 - Crankshaft group