Volkswagen Golf 2004 Workshop Manual page 230

Golf 2004 ➤ , Golf Plus 2005 ➤ , Passat 2006 ➤ , Touran 2003 ➤
4-cylinder diesel engine (2.0 l engine, 4 valve) - Edition 02.2011
♦ Torque wrench (5...50 Nm) -V.A.G 1331-
Removing
– Lever off cap ⇒ Item 4 (page 223)
– Remove securing bolt beneath it.
Golf, Golf Plus and Passat:
– To remove accelerator module, push release tool -T 10238-
(for right-hand drive vehicles -T10240- ) into opening provided
to stop.
Touran:
– To remove accelerator module, push release tool -T 10269-
(for right-hand drive vehicles -T10297- ) into opening provided
to stop.
Continuation for all vehicle types:
– Pull connector off accelerator module.
– Pull wiring guide off accelerator pedal module.
– Pull out accelerator module vertically.
Installing
Installation is carried out in the reverse order. When installing,
note the following:
– Attach connector and wiring guide to accelerator module.
– Press accelerator module onto securing pins.
– Insert centring pin into hole in vehicle floor.
– Secure accelerator module with securing bolt -3-. Specified
torque: 9 Nm
– Attach cap.
– Install steering column cover.
224
Rep. gr.20 - Fuel supply system
using a screwdriver.