Volkswagen Golf 2004 Workshop Manual page 108

Golf 2004 ➤ , Golf Plus 2005 ➤ , Passat 2006 ➤ , Touran 2003 ➤
4-cylinder diesel engine (2.0 l engine, 4 valve) - Edition 02.2011
Special tools and workshop
equipment required
♦ Torque wrench (5...50 Nm)
-V.A.G 1331-
♦ Locking device -T10255-
♦ Locking pin -T10115-
♦ Two-arm puller -T40001-
with claw -T40001/5- and
claw -T40001/3-
♦ Thrust plate -30 - 11-
♦ Temperature gauge -VAS
6519- or hand-held multi‐
meter -V.A.G 1526D- in
combination with tempera‐
ture sensor -V.A.G 1526D/
1-
♦ Commercially available hotplate
Procedure
– Remove insulation tray ⇒ General body repairs, exterior; Rep.
gr. 50 ; Body - front; Assembly overview .
– Remove front right wheel housing liner ⇒ General body re‐
pairs, exterior; Rep. gr. 66 ; Removing and installing wheel
housing liners .
– Remove balancer shaft module
102
Rep. gr.17 - Lubrication
⇒ page 98 .