Rules For Cleanliness; Rules For Cleanliness When Working On Fuel Supply System - Volkswagen Golf 2004 Workshop Manual

2

Rules for cleanliness

2.1 Rules for cleanliness when working on
fuel supply system
When working on the fuel supply and injection system, pay careful
attention to the following „6 rules" for cleanliness:
♦ Thoroughly clean all unions and surrounding areas before dis‐
connecting.
♦ Place removed parts on a clean surface and cover. Use only
lint-free cloths.
♦ Carefully cover opened components or seal if repairs cannot
be carried out immediately.
♦ Install clean components only. Do not remove replacement
parts from packing until immediately before installing. Do not
use parts that have not been stored in their packing (e.g. in
tool boxes etc.).
♦ When system is open: do not work with compressed air if this
can be avoided. Do not move vehicle unless absolutely nec‐
essary.
♦ Also ensure that no diesel fuel runs on to the coolant hoses.
Should this occur, the hoses must be cleaned immediately.
Damaged hoses must be renewed.
Golf 2004 ➤ , Golf Plus 2005 ➤ , Passat 2006 ➤ , Touran 2003 ➤
4-cylinder diesel engine (2.0 l engine, 4 valve) - Edition 02.2011
151
2. Rules for cleanliness