Volkswagen Golf 2004 Workshop Manual page 277

– Lift cover -1- and pull it forwards.
– Slide connector locking devices -1- on engine control unit out‐
wards and pull off both connectors.
– Remove retainer frame with engine control unit from plenum
chamber.
– Press locking device -1- outwards and slide engine control unit
-2- in -direction of arrow-.
Installing
– Slide engine control unit -1- into retaining frame in
-direction of arrow-.
– Fit retainer frame with engine control unit onto retainer in ple‐
num chamber.
Specified torque of securing nuts for retainer: 6 Nm.
Golf 2004 ➤ , Golf Plus 2005 ➤ , Passat 2006 ➤ , Touran 2003 ➤
4-cylinder diesel engine (2.0 l engine, 4 valve) - Edition 02.2011
4. Engine control unit (Passat)
271