Front Brake Pads - Crew; Pad Removal - Crew - Polaris RANGER ETX 2015 Owner's Manual

Table of Contents

BRAKE SYSTEM

FRONT BRAKE PADS - CREW

1. Elevate and support front of vehicle.

Use care when supporting vehicle so that it does not tip

Severe injury may occur if machine tips or falls.

2. Remove the wheel nuts, washers and front wheel.

Loosen pad adjuster screw (Item 1) 2-3 turns.

3. Remove the upper and lower caliper mounting bolts

and remove the caliper from the front hub.

When removing caliper, use care not to damage brake

line. Support caliper so to avoid kinking or bending

9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

4. Push caliper piston into caliper bore slowly using a

C-clamp or locking pliers with pads installed.

Brake fluid will be forced through compensating port

into master cylinder fluid reservoir when piston is

pushed back into caliper. Remove excess fluid from

reservoir as required.

5. Push mounting bracket inward and slip outer brake

pad past edge. Then remove inner pad.

Table of Contents